Contact
ZCC Cutting Tools Europe

We’re there for you

Sandro Maaß Manager Product Management

technology@zccct-europe.com

Turning Tools

Recommendations for Tool Holders

Overview of Tool Holders

Our tool holders allow you to increase the efficiency of your production operations while also meeting high standards in terms of component quality. We offer a range of tool holders for any machining operation, from ISO turning to grooving.

High feed turning system SPXNR/L
Automotive
Energy Management
General Engineering
Rail Technology
High feed turning system SPXNR/L
  • Process-reliable machining with the highest possible stability
  • Targeted cooling for optimum chip removal and long tool life
  • High feed rates reduce machining time
  • Toolholder for face and longitudinal machining
  • Insert PNMX-XH
  • Entering angle 23°
  • Cross-sections from 20×20 to 25×25 mm
Automotive
Energy Management
General Engineering
Rail Technology
High feed turning system SOXNR/L
Automotive
Energy Management
General Engineering
Rail Technology
High feed turning system SOXNR/L
  • Prozesssicheres Fertigen mit höchstmöglicher Stabilität
  • Zielgerichtete Kühlung für optimale Spanabfuhr und lange Standzeiten
  • Hohe Vorschübe reduzieren die Bearbeitungszeit
  • Werkzeughalter für Plan-, Längsbearbeitung
  • Wendeschneidplatte ONMX-XH
  • Einstellwinkel 23°
  • Querschnitte von 20×20 bis 25×25 mm
Automotive
Energy Management
General Engineering
Rail Technology
zFlex modular grooving system (grooving/turning)
M
P
S
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
zFlex modular grooving system (grooving/turning)
M
P
S
  • Highly flexible for radial grooving and turning
  • A wide range of machine-specific interfaces such as PST are provided
  • Spring tension mechanism minimises plastic deformation from the clamp finger
  • ELI (External Like Internal)
  • Groove width 2.0–8.0 mm
  • Groove depth up to max. 31 mm
  • Profiling with full-radius groove inserts possible
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
zFlex modular grooving system (cut-off)
M
P
S
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
zFlex modular grooving system (cut-off)
M
P
S
  • Reinforced base and primary cartridges for deep parting off applications
  • Parting off of diameters of up 80 mm with one-sided groove insert
  • Maximum stability and system rigidity lead to extremely flat, smooth results when parting off
  • Spring tension mechanism minimises plastic deformation from the clamp finger
  • ELI (External Like Internal)
  • Groove width 2.0–3.0 mm
  • Groove depth up to max. 40 mm
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
Wheelset cassette RW-PLANR/L
P
Rail Technology
Wheelset cassette RW-PLANR/L
P
  • Rugged mounting cassette for LNUX railway wheel plates
  • Designed for machining the running surface on railway wheels
  • Knee lever clamping system
  • Compatible with commercially available systems
  • Available for LNUX19 and LNUX30 inserts
Rail Technology
Wheelset cassette RW-PLFNR/L
P
Rail Technology
Wheelset cassette RW-PLFNR/L
P
  • Rugged mounting cassette for LNUX railway wheel plates
  • Designed for machining flange flanks on railway wheels
  • Knee lever clamping system
  • Compatible with commercially available systems
  • Available for LNUX19 inserts
Rail Technology
Wheelset cassette RW-PCLNR/L
P
Rail Technology
Wheelset cassette RW-PCLNR/L
P
  • Rugged mounting cassette for CNMM railway wheel plates
  • Designed for machining the running surface on railway wheels
  • Knee lever clamping system
  • Compatible with commercially available systems
  • Available for CNMM190740 and CNMM191140 inserts
Rail Technology
zType threading toolholder with internal cooling (external)
Aerospace
Automotive
General Engineering
Medical Technology
zType threading toolholder with internal cooling (external)
  • For external machining for all common turning centres
  • Targeted cooling for optimum chip removal and long tool life
  • Higher productivity due to minimised machining temperature
  • Large variety of zType threading inserts available
  • Threading inserts zType11–zType22
  • Cross sections from 16×16 to 32×32 mm
Aerospace
Automotive
General Engineering
Medical Technology
zType boring bar with internal cooling
Aerospace
Automotive
General Engineering
Medical Technology
zType boring bar with internal cooling
  • Tool holder for internal machining for all common turning centres
  • Targeted cooling for optimum chip removal and long tool life
  • Higher productivity due to minimised machining temperature
  • Large variety of zType threading inserts available
  • Threading insert zType11–zType22
  • Clamping diameter 16.0–50.0 mm
Aerospace
Automotive
General Engineering
Medical Technology
External thread holder
Aerospace
Automotive
General Engineering
Medical Technology
External thread holder
K
M
N
P
S
  • Tool holder for external machining for all common turning centres
  • Threading insert RT11.01–22.01 and LT11.01–22.01
  • Cross-sections from 16×16 to 32×32 mm
Aerospace
Automotive
General Engineering
Medical Technology
Internal thread holder
Aerospace
Automotive
General Engineering
Medical Technology
Internal thread holder
K
M
N
P
S
  • Tool holder for internal machining for all common turning centres
  • Threading insert RT11.01–22.01 and LT11.01–22.01
  • Clamping diameter 16.0–50.0 mm
Aerospace
Automotive
General Engineering
Medical Technology
QE* Parting blade
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
QE* Parting blade
H
K
M
N
P
S
  • Parting-off blade for all common turning centres
  • Suitable for grooving and parting off
  • Prism height 26.0 and 32.0 mm
  • Piercing widths 2.5–6.0 mm
  • D((max)) 60.0–120.0 mm
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
QF* Axial grooving tool holder (external)
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
QF* Axial grooving tool holder (external)
H
K
M
N
P
S
  • Axial tool holder for all common turning centres
  • Suitable for grooving and recess turning
  • Cross-sections 20×20 and 25×25 mm
  • Neutral and cranked design
  • From D((min)) 48.0 mm to D((max)) 400.0 mm
  • Grooving widths from 2.0–6.0 mm
  • Depth of cut from 7.0–22.0 mm
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
QE* Radial grooving tool holder (external)
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
QE* Radial grooving tool holder (external)
H
K
M
N
P
S
  • Radial tool holder for all common turning centres
  • Suitable for parting-off, grooving and groove turning
  • Cross-sections from 16×16 to 20×20 mm
  • Grooving widths 2.0–6.0 mm
  • Depth of cut 4.0–22.0 mm
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
QE* Grooving tool holder ( internal)
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
QE* Grooving tool holder ( internal)
H
K
M
N
P
S
  • Radial tool holder for all common turning centres
  • Suitable for parting-off, grooving and groove turning
  • Cross-sections from 16×16 to 20×20 mm
  • Grooving widths 2.0–6.0 mm
  • Depth of cut 4.0–22.0 mm
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
DG(S)C Grooving tool holder
M
P
S
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
DG(S)C Grooving tool holder
M
P
S
H
K
N

DG(S)C grooving system (for bigger grooving depths)

  • Radial tool holder for all common turning centres
  • Suitable for parting-off, grooving and grooving turning
  • Direct coolant supply
  • Cross-sections from 16×16 to 25×25 mm
  • Grooving widths 2.0–6.0 mm
  • Targeted coolant supply
  • Controlled chip flow
  • Excellent surface finish
  • Depth of cut up to 30.0 mm
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
Rail Technology
SC Grooving tool holder
M
P
S
Aerospace
Automotive
Die and Mold Making
Energy Management
General Engineering
Medical Technology
SC Grooving tool holder
M
P
S
H
K
N

SC grooving system (for sliding head lathes)

  • Radial tool holder for all common turning centres
  • Suitable for parting-off, grooving and grooving turning
  • Cross-sections from 10×10 to 20×20 mm
  • Grooving widths 2.0–3.0 mm
  • Depth of cut 10.0–22.0 mm
  • Targeted coolant supply
  • Controlled chip flow
  • Excellent surface finish
  • Aerospace
    Automotive
    Die and Mold Making
    Energy Management
    General Engineering
    Medical Technology
    SwissTurn
    M
    P
    S
    Aerospace
    Automotive
    Die and Mold Making
    Energy Management
    General Engineering
    Medical Technology
    SwissTurn
    M
    P
    S
    H
    K
    N
    • Tool holder for facing, longitudinal and profile operations
    • Screw clamping for positive inserts
    • Cross-sections from 10.0×10.0 to 20.0×20.0 mm
    Aerospace
    Automotive
    Die and Mold Making
    Energy Management
    General Engineering
    Medical Technology
    ISO Boring bar
    Aerospace
    Automotive
    Die and Mold Making
    Energy Management
    General Engineering
    Medical Technology
    Rail Technology
    ISO Boring bar
    H
    K
    M
    N
    P
    S
    • Tool holders for facing, longitudinal and profile operations
    • Screw clamping for positive inserts
    • Shaft diameter 8.0–40.0 mm
    Aerospace
    Automotive
    Die and Mold Making
    Energy Management
    General Engineering
    Medical Technology
    Rail Technology
    ISO External tool holders
    Aerospace
    Automotive
    Die and Mold Making
    Energy Management
    General Engineering
    Medical Technology
    Rail Technology
    ISO External tool holders
    H
    K
    M
    N
    P
    S
    X
    • Tool holders for facing, longitudinal and profile operations
    • Knee lever, top and maulti clamping for negative inserts
    • Screw clamping for positive inserts
    • Cross-sections from 12×12 to 32×32 mm
    Aerospace
    Automotive
    Die and Mold Making
    Energy Management
    General Engineering
    Medical Technology
    Rail Technology
    zRay High-pressure tool
    M
    P
    S
    Aerospace
    Automotive
    Energy Management
    zRay High-pressure tool
    M
    P
    S

    Primary workpiece materials

    • High temperature steels
    • Titanium alloys
    • Rolling bearing steels

    Your benefits

    • 100% chip control
    • Replaceable cassette
    • Form-fitting toothing
    • Low vibration
    Aerospace
    Automotive
    Energy Management
    All
    General Turning
    Parting Off and Grooving Tool Holders
    Tooling Systems and Related Equipment
    Threading Tool Holders
    contact
    ZCC Cutting Tools Europe

    We’re there for you