Contact
ZCC Cutting Tools Europe

We’re there for you

Dennis Hollenberg Product Manager Solid Carbide Tools

technology@zccct-europe.com

Milling Cutters

Grade Overview

Milling Cutter Grades

The grade of milling cutter you choose has a major influence on your machining process. We’ll show you the grade that meets the needs of your specific application.

Grade
ISO
Grade description
YK30F
K30
Uncoated K30 carbide substrate for steel, stainless steel, cast iron and non ferrous materials.
YK30F
KMG406
PVD coated carbide substrate for entry into high performance machining. Universal range of application for steel and cast materials up to 55 HRC as well as stainless steel.
KMG406
YK40F
K20–K30
N20–N30
Uncoated K20–K30/N20–N30 carbide substrate for cast iron and non ferrous materials.
YK40F
KMG309
PVD coated carbide substrate for non ferrous materials. High wear resistance even in abrasive materials.
KMG309
KMG555
PVD coated carbide substrate for hard milling application of steel (HRC 55–68), highest wear resistance and toughness for best cutting result.
KMG555
KMG405
PVD coated carbide substrate for high performance milling application of steel (up to HRC <55), stainless steel, super alloy material and cast iron. High wear resistance and toughness for a wide application field.
KMG405
KMG303
PVD coated carbide substrate for universal milling application of steel (up to HRC<=48), stainless steel and cast iron.
KMG303
KMD401
PVD coated carbide substrate for high performance milling application of non-ferrous metals, CFRP and GFRP and organic materials. The DLC layer has very good wear protection and high thermal stability.
KMD401
YBG212
P25–P35
M25–M40
PVD coated M25–M40/P25–P35 carbide substrate for steel and stainless steel. Especially for inner insert at drilling operation.
YBG212
YB9320
P10–P30
M10–M25
PVD multilayer coated M10–M25/P10–P30 carbide substrate for finishing to medium application of stainless steel, super alloy and steel (grooving/milling). Optimized coating stability for higher wear resistance and thermal stability in a wide application field.
YB9320
YBG205
P10–P30
M20–M40
S15–S25
PVD multilayer coated M20–M40/S15–S25/P10–P30 carbide substrate for finishing to medium application of stainless steel, super alloy and steel (milling). Good wear resistance and thermal stability in a wide application field.
YBG205
YBS203
S15–S25
Turning and milling grades for processing heat-resistant materials. A special carbon substrate and the latest PVD coating technology enable a very good wear behaviour, high fracture toughness and high thermal stability.
YBS203
YBG202
P10–P30
M10–M25
PVD coated M10–M25/P10–P30 carbide substrate for finishing to medium application of stainless steel and steel (milling). Good wear resistance in a wide application field.
YBG202
YD201
K10–K30
N10–N30
Uncoated N10–N30/K10–K30 carbide substrate for medium application in aluminum and other material.
YD201
YD101
N05–N20
K05–K20
Uncoated N05–N20/K05–K20 carbide substrate for fine to medium application in aluminum and other material.
YD101
YNG151C
P05–P15
PVD coated P05–P15 cermet grade for fine finishing operation of steel and stainless steel. Good wear resistance and capability against plastic deformation for good surface roughness.
YNG151C
YNG151
P05–P15
Uncoated P05–P15 cermet grade for fine finishing operation of steel and stainless steel. Good resistance against plastic deformation for good surface finishing.
YNG151
YBS303
S25–S35
Milling grade for machining titanium alloys. A tough carbide substrate and the latest PVD coating technology with increased impact resistance and high thermal stability.
YBS303
YBG302
P15–P30
M25–M40
PVD coated M25–M40/P15–P30 carbide substrate for medium roughing application of stainless steel and steel (milling). Good wear resistance and toughness.
YBG302
YBG102
S05–S15
PVD coated S05–S15 carbide substrate for finishing to medium application of super alloy material, stainless steel and aluminum. Good wear resistance in a wide application field.
YBG102
YBG101
N05–N20
PVD coated N05–N20 carbide substrate for finishing to medium application in aluminum material. Coating only on the top face, in combination with the aluminum chip breaker, prevents build up edges and gives a smooth cut.
YBG101
YBD252
K20–K35
CVD coated K20–K35 carbide substrate. Optimized for medium to roughing operation of cast iron and Steel. Good wear resistance and toughness at higher cutting speed.
YBD252
YBD152
K10–K25
CVD coated K10–K25 carbide substrate. Optimized for medium to roughing operation of cast iron. Good wear resistance and toughness at higher cutting speed.
YBD152
YBM351
P25–P40
M20–M40
CVD coated P25–P40/M25–M40 carbide grade for roughing operation in stainless steel and steel. Good wear resistance and edge stability at normal cutting speed.
YBM351
YBM251
P20–P30
M15–M35
CVD coated P20–P30/M15–M35 carbide grade for medium to roughing operation in stainless steel and steel with wide application field. Good wear resistance and capability against plastic deformation at normal cutting speed.
YBM251
YBM253
M15–M35
CVD coated M15–M35 carbide grade for medium to roughing operation in stainless steel with wide application field. High wear resistance and capability against plasctic deformation at higher cutting speed.
YBM253
YBC401
P30–P50
M30–M40
CVD coated P30–P50/M30–M40 carbide grade for roughing operation of steel at lower cutting speed and unstable condition.
YBC401
YBC301
P20–P35
CVD coated P20–P35 carbide grade for medium operation to roughing of steel at lower cutting speed.
YBC301
YBC302
P20–P35
CVD coated P20–P35 carbide grade for medium operation to roughing of steel at higher cutting speed. Optimal performance of wear resistance and toughness for a wide application field.
YBC302
All
Uncoated Carbide
Coated Cemented Carbide PVD
Cermet
Coated Cemented Carbide CVD
contact
ZCC Cutting Tools Europe

We’re there for you